Powersoft has added the K3 to its flagship Digam K series. Capable of producing two channels of 2.6kW (into 4 ohms), the K3 offers the same performance as the other, more powerful, models in the series, in a 1U-high, 8kg package with Neutrik XLR I/O connectors.
Features:
- 2x 1.400 W/8 Ohm 2x 2.600 W/4 Ohm 2x 2.800 W/2 Ohm
- Dimensions: 1 RU, depth 360 mm (120 mm less than other K series models)
- Weight: 8 Kg / 17,6 lbs
- Power Consumption: 1500 VA
- 400 Vac Mains over voltage protected
- XLR female Neutrik® input connectors
- XLR male Neutrik® connectors for link capability
- Advanced switch-mode worldwide operating power supply technology
- Power Factor Correction PFC for extremely low mains current consumption and wide mains operating range
- Temperature controlled continuous variable speed fan for low noise and optimized cooling LCD matrix interactive display
- Digital gain-attenuator control
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Comprehensive-user friendly front panel display menu
- Temperature monitoring with LCD traced historical behaviour
- Downloadable log file of functional fault events with time related trace Real time load impedance measurement / display for each channel
- Real time output power measurements / display for each channel Real time mains voltage and current measurements / display
- Defeateable gate selection for each channel Hardware monitor available for fast local diagnostic
- Fixed frequency switch mode output stage for high grade sound accuracy
- Built in Remote Control (RS 485 interface) for full diagnostic, operational setting and system monitoring
- Smart Card settings, parameters and upgrades functionality
- Lockable set-up by user selectable access key code
- Optional DSP board Optional Ethernet board
- Bandwidth (1W, 8 Ω): 5Hz – 20 KHz +/- 0.2dB
- SNR (20Hz-20kHz A-weighted): >112 dB
- Distortion THD: Max < 0.5% from 0.1W to full power (typically < 0.05%) Intermodulation distortion DIM30: Max < 0.5% from 0.1W to full power (typically < 0.05%)
- Intermodulation distortion SMPTE: Max < 0.5% from 0.1W to full power (typically < 0.05%)
- Damping Factor (8 Ω ): >5000 (20Hz-200Hz)
- Voltage Gain: 26dB; 29dB; 32dB; 35dB user selectable
- Maximum Input Level: +25dBu absolute maximum
- Slew Rate (8 Ω ): 50V/µS (input filter bypassed) protections.png
- DC, VHF, THERMAL, AC, CLIP LIMITER, 400Vac MAINS OVERVOLTAGE
- Line Voltages: 95 - 265V (50/60Hz) Power Factor cos() More than 0.90 from 500 W to full power Operating Environmental Temperature: 0°C / + 45° C
For more information, please Contact
Us. |
