APB Dynasonics

 
 
 

APB-DynaSonics, Inc. introduces the Spectra-C and Spectra-T consoles. Each VCA based model is available in 24, 32, 40, 48 and 56 Mono input formats. In addition, each of these consoles is provided with 4 additional stereo input channels.Spectra Console

Spectra-C & Spectra-T Consoles

The difference between Spectra-C and Spectra-T is within the EQ section. Both models include a variable high pass filter (20Hz to 400Hz) with ON switch and LED. The Spectra-C EQ is four band with High and Low Frequency, each switchable between two frequencies (HF 60/120Hz - LF 8kHz/12kHz) while each mid frequency is sweepable over a 20:1 range. Also included is an EQ ON switch with LED.

The Spectra-T EQ is sweepable in all four bands and includes shelving/bell switches on HF/LF frequency bands. HF/LF bell mode features an asymmetric response, with 2/3 octave boost and 1/4 octave cut. The two mid bands are switchable between 1 octave and 1/3 octave bandwidth in both boost and cut. An ON switch with LED is provided for both EQ On and Insert On functions on Spectra-T.

Spectra EQCommon Features (Both Spectra-C and Spectra-T):

  • 5 Chassis Sizes plus optional Input Expander
  • Highest quality Burr-Brown Microphone Pre-amps used on input channels
  • 8 VCA Input Groups
  • Output VCA system for Left-Right, Center, and Mono outputs
  • User selectable VCA system on all (4) Matrix outputs
  • THAT Corp. VCA elements used throughout
  • 12 mute group system (4 Discrete / 8 VCA assignment linked)
  • 10 Auxiliary buses with pre/post fader (4) and pre/post EQ (2) switches
  • 100mm faders on Aux outputs with polarity reverse switches
  • Aux Outputs have pre/post assignment to Matrix section and assignments to Left, Right, Center, and Mono buses
  • 4 Stereo/Split Track line Input channels included on all console configurations
  • Inserts on all primary outputs of the console including Aux and Matrix outputs
  • Internally Illuminated Solo and Mute Switches
  • 2 or 3 speaker (LCR) Control Room monitoring (front panel switchable)
  • 2 bus (mono/stereo) Solo PFL system, 3 bus (stereo/LCR) Solo AFL system
  • Left/Right, Center, Mono (Sub-Woofer/Aux) Assignment System
  • Sub-Woofer Mix can be derived from discrete Mono or Aux assignment
  • 15 x 4 Matrix system with Inserts and XLR balanced outputs
  • 2 Mono Alternate Outputs with XLR (transformer isolated) balanced outputs
  • Stereo (record) Alternate Output
  • 1/8" and ¼" Headphone Output connectors
  • Talkback System with Oscillator
  • 6-segment Input channel metering
  • Eighteen 15-segment output meters
  • XLR Lamp connectors with dimmer system
  • 24 mono Input expander available
  • Optional Redundant Power Supply (Plug In)

SPECTRA MODELS

Spectra-C24+4 Spectra-T24+4 24 Mono Mic/Line Input Channels + 4 Stereo Line Input Channels*
Spectra-C32+4 Spectra-T32+4 32 Mono Mic/Line Input Channels + 4 Stereo Line Input Channels*
Spectra-C40+4 Spectra-T40+4 40 Mono Mic/Line Input Channels + 4 Stereo Line Input Channels*
Spectra-C48+4 Spectra-T48+4 48 Mono Mic/Line Input Channels + 4 Stereo Line Input Channels*
Spectra-C56+4 Spectra-T56+4 56 Mono Mic/Line Input Channels + 4 Stereo Line Input Channels*

Spectra-C24 Exp Spectra-T24 EXP 24 Mono Mic/Line Input Expander with interconnect system.

A "P" suffix may be added to any of the above models which adds a redundant power supply (2nd power supply) as well as Littlites for console illumination.

*Stereo input channels may be operated in mono "Split Track" mode.

For further information please visit the APB Dynasonics Website or Contact Us .